Delta Qwikseal Plugs Box-100
Delta Qwikseal Plugs Box-100
Delta Qwikseal Plugs are seal sealing water tight plugs and are used to mechanically fix Delta MS500 membranes to the walls in basement waterproofing applications.
Delta Qwikseal Plugs feature an integral rubber grommets that provides a waterproof and vapour proof seal at the joint with the Delta MS500 membrane.
Delta Qwikseal plugs have a sealed integral shank that can accommodate a 5mm diameter, size 10 screw. This allow for the fixings of timber battens, dry lining systems or even threaded cavity ties without compromising the waterproof seal.
Installation Instructions
A 10mm SDS drill bit is used to drill through the Delta wall membrane and a minimum of 65mm into the wall.
The Delta Qwikseal Plug is then hammered into place to hold the wall membrane in place.
Plug fixings can match the requirements of the wall linings:
600mm centres – for timber battens.
1000mm centres – for gypliner systems.
900x450mm centres – to support blockwork liner walls.
Our Guide for the installation of Delta cavity membrane systems can be found here.
Weight | 1 kg |
---|---|
Dimensions | 58 × 10 cm |
Kevin –
Good plugs, hold the wall membrane in place. They dont snap when you hammer them into the wall which is nice. Came quick too.