Delta PT Slimline Membrane 1m x 15m
Delta PT Slimline Membrane 1.5m x 10m
Damp Proof and Waterproof Membrane for Walls.
Delta PT Slimline is a waterproof and vapour proof basement waterproofing membrane. Delta PT Slimline combines and ultra low profile 4mm stud heaight withs a thermically bonded mesh or lath on the surface that allows for the direct application of render or boarding using dot and dab fixings.
Delta PT Slimline is typically used to waterproof basement walls and the retaining walls of lightwells.
This premium quality waterproof membrane has an 4mm fluted stud to deal effectively water ingress and provide a high capacity drainage void.
Delta PT Slimline comes in a 15m2 roll making it great value for smaller basement waterproofing or damp proofing projects
Uses of Delta PT Slimline
Delta PT Slimline is primarily used in to provide a low profile waterproofing barrier where a thin build up is required.
Delta PT is also used above ground to provide a damp proof barrier and to isolate plaster finishes from contamination.
Delta PT Slimline is used in the following:
To waterproof basement and cellar walls subject to light water ingress.
To waterproof window reveals or around stairs in basements.
Above ground as a low profile damp proof and salt contamination barrier.
In listed or historic buildings where a reversible waterproofing or damp proof system is required.
Delta PT Slimline is installed stud side facing the wall. Joints in the Delta PT Slimline are sealed using Delta Tape and Delta Corner Strip
Delta PT slimline is used vertically and mechanically fixed to the substrate using Delta PT Plugs With Grommets.
Where a direct render is to be applied joints should be overtaped using Delta Fleece tape.
Typical Fixings are 400mm centres for dot and dab boarding. 200mm centres for directly applied render. 150mm centres for external directly applied render.
|Dimensions||10 × 1.5 × 4 cm|
You may also like…
- Delta PT Plugs With Grommets 200 With 8mm drill bit.
- Add to basket